The installation form of solid wood wallboard is the same as that of medium density fiberboard, and most of them adopt horizontal, straight and herringbone. The construction method is different from the medium density fiberboard. The specific construction steps are as follows.
① First, a horizontal line (for horizontal stick type) or a vertical line (for direct stick type) is ejected from the wall construction site.
② Construction without internal gear. Apply the glue directly to the construction site, apply glue on the back of the solid wood wallboard, and then directly adhere to the standard line, one by one, directly.
③ Construction with inner block. First fix the inner block to the wall. For example, the horizontal type internal block should be arranged vertically, and the direct type internal block should be fixed horizontally. The flatness of the inner baffle should be adjusted. The requirements of the inner baffle are the same as those of the medium density fiberboard, and the arrangement density depends on the length of the wall panel.
④ wall board. When using the glue method, now apply glue to the inner block, and then apply glue to the corresponding place on the back of the wall panel. When paving, stick one by one, but you should pay attention to the length, thickness, and order. You can also use gun nails to directly fix and block the inner block.
⑤ Paint. After installation, first sand and then paint, the color of the paint is mostly painted wood.
The above is the normal operation process of the hotel's fixed furniture during installation. The actual operation should be flexible according to the actual situation on the site. There are many ways.